Product ID:LUBRIPLATE AERO
MSDS Date:07/01/1990
FSC:9150
NIIN:00-076-1564
MSDS Number: CBQCM

FISKE BROTHERS REFINING CO

129 LOCKWOOD ST
NEWARK, NJ 07105
US

Emergency Phone: 201-589-9150

Info Phone: 201-589-9150

Preparer: ROBERT J. SIBILIA

Cage: 9N579

FISKE BROTHERS REFINING CO

TOLEDO, OH 43605 US

Telephone: 419-691-2491

Cage: 9N579

LITHIUM SOAP

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL OIL

CAS: 8012-95-1

RTECS: PY8030000

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3 (MIST)

ADDITIVES

OSHA PEL N/K

ACGIH TLV: N/K

ZINC; (ZINC COMPOUNDS) (SARA 313) (CERCLA)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT MAY
CAUSE SKIN IRRITATION. PRODUCT CONTACTING THE EYES MAY CAUSE EYE
IRRITATION. HUMAN HEALTH RISKS VARY FROM PERSON TO PERSON. AS A
PRECAUTION, EXPOSURE TO LIQUIDS, VAPORS, MISTS AND FUMES SHOULD BE
MINIMIZED. THIS PRODUCT HAS A LOW ORDER OF ACUTE ORAL TOXICITY, BUT
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: MINUTE AMOUNTS ASPIRATED INTO THE
LUNGS DURING INGESTION MAY CAUSE MILD TO SEVERE PULMONARY INJURY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH W/CLEAR WATER FOR AT LEAST 15 MIN OR UNTIL IRRIT
SUBSIDES. IF IRRIT PERSISTS, CONSULT MD. SKIN: REMOVE ANY CONTAMD
CLTHG & WASH W/SOAP & WARM WATER. IF INJECTED BY HIGH PRESS UNDER
SKIN, R EGARDLESS OF APPEARANCE OR ITS SIZE, CONTACT MD IMMED.
DELAY MAY CAUSE LOSS OF AFFECTED PART OF THE BODY. INHAL: VAP PRESS
IS VERY LOW & INHAL AT ROOM TEMP IS NOT A PROB. IF OVERCOME BY
(SUPDAT)

Flash Point Method:COC
Flash Point:375F,191C
Lower Limits:0.9%
Upper Limits:7.0%
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE OR WATER SPRAY
(FOG).
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDANTS.
EMPTY CONTAINERS RETAIN RESIDUE. DO NOT CUT, DRILL, GRIND OR WELD
AS THEY MAY EXPLODE.

Spill Release Procedures:SCRAPE UP GREASE, WASH REMAINDER W/SUITABLE
PETROLEUM SOLVENT OR ADD ABSORBENT. KEEP PETROLEUM PRODUCTS OUT OF
SEWERS AND WATER COURSES. ADVISE AUTHORITIES IF PRODUCT HAS ENTERED
OR MAY ENTER SEWERS A ND WATER COURSES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME OR STRONG
OXIDANTS.
Other Precautions:REMOVE OIL-SOAKED CLOTHING AND LAUNDER BEFORE REUSE.
CLEANSE SKIN THOROUGHLY AFTER CONTACT.

Respiratory Protection:NORMALLY NOT NEEDED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: USED TO CAPTURE FUMES AND VAPORS.
Protective Gloves:OIL-RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . USE
OIL-RESISTANT APRON IF NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: VAP FROM HOT PROD, IMMED REMOVE FROM EXPOS & CALL MD.
INGEST: IF INGESTED, CALL MD IMMED. DO NOT INDUCE VOMITING.

Boiling Pt:B.P. Text:>550F,>288C
Melt/Freeze Pt:M.P/F.P Text:SEMI-SOLID
Vapor Pres:<0.01
Vapor Density:>5
Spec Gravity:0.884 (H*2O=1)
Evaporation Rate & Reference:<0.01 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SMOOTH, WHITE GREASE WITH MINERAL OIL ODOR.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDANTS LIKE LIQUID CHLORINE, CONCENTRATED
OXYGEN.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:IF INCOMPLETE COMBUSTION, CARBON
MONOXIDE.

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE FEDERAL, STATE
AND LOCAL DISPOSAL REGULATIONS. DISPOSE OF ABSORBED MATERIAL AT AN
APPROVED WASTE DISPOSAL FACILITY OR SITE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.